Wednesday, April 21, 2010

Skully Cat tutorial (PTU)

Skelly Cat


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Cute Gothic Skull taggers kit DiseƱando Scraps. This is a PTU kit, which is available at Scrappetizing.com.

Tube of choice. I am using psp5709-FaelineFaery by Misty Benson. This is a FTU tube, but you must have a license to use this tube, which is available at MyPSPTubes.com.

Wee Scots Lass mask #248 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Moonbeam alpha by Julie It Is. This is a FTU alpha which may be downloaded from Julie's Blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood filled white.

To begin, open a new raster layer canvas, 800 x 800 pxls, floodfilled white.

Open cutegothicskullpaper20. Go to layers --> load/save mask --> load mask from disk and find Wee Scots Lass mask #248. Make sure the "Fit to Canvas" button is checked, then click on load.

Copy merged, and add to main canvas, centered.

Open cutegothicskullstartemplate5, copy and add to main canvas, centered. Image --> Free rotate --> rotate right, 15 degrees.

Open cutegothicskullframebutton, resize to 75% and add to main canvas, centered.

Open psp5709-SCBenson-FaelineFaery, copt the Girl and Cat layer and add to main canvas, centered.

on the Layers pallet, duplicate your frame layer, then drag the copy over the tube layer. Set your selection tool to Selection type: Rectangle, Mode: Replace, and select the top half of the copied frame. Delete.

Selections --> select none.

Add a drop shadow of choice to the tube layer. I am using offsets, vertical & horizontal of -8 eac, opacity of 85, blur of 35, color black #000000.

On the layers pallet, click on the frame copy layer to activate.

Open cutegothicskullribbonstiches3 and resize to 65%. Copy and add to main canvas, centered at H400, V650.

Open cutegothicskullheart4, and resize to 35%. add to main canvas, centered at H200, V600. Image --> free rotate --> rotate left, 15 degrees.

Open cutegothicskullpin2, and resize to 25%. Add to main canvas, centered at H600, V150. Image --> free rotate --> rotate right, 20 degrees.

Using your eraser tool, erase a wee it of the top part of the pin, so that it looks like it's stuck through the paper.

On the Materials pallet, set your foreground color to transparent, and your background color to white (#ffffff). Using font of choice, add copyright information to the tag.

For the FaelineFaery tube that information is: (c)Misty Benson www.mistybenson.com Your_MPTLicense#.

I am using Trebuchet MS, 4 points, bold and centered and have fit text to path to wrap around the frame.

You may now save the artist's copy of your tube as a .pspimage file.

Using font or alpha of choice, add name desired name to tag. I am using the Moonbeam alpha by Julie It Is, which is a FTU full size alpha I've resized for tagging purposes.

I have centered the name at H500, V650. Actual location may vary depending upon the size and length of the name you are using.

You can now delete the white background layer and merge visible. Resize to 75% (600 x 600 pxls) and save your tag as a .png file, and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Monday, April 19, 2010

Goth Chic Tutorial (PTU)

Goth Chic


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Goth Chic taggers kit Created by Jill. This is a PTU kit, which is available at Sophisti-Scraps.com.

Tube of choice. I am using psp15481-Yvette by Elias Chatzoudis. You must have a license to use this tube, which is available at MyPSPTubes.com.

Wee Scots Lass mask #221 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Gothic Chic alpha, which is a FTU alpha by Whispy's D'zines. This is a full sized alpha I have resized for tagging purposes.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open GC_paper05_cbj. Go to layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask #221. Make sure the fit to canvas box is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open GC_chain_Cbj and add to main canvas, centered.

Open GC_glitter1_cbj and add to main canvas, centered.

Open GC_glitter2_cbj and add to main canvas, centered.

Open GC-frame1_cbj, resize to 85%, and add to main canvas, centered.

Open psp15481-SCChatzoudis-Yvette, copy Raster1, and add to main canvas, centered.

Duplicate the frame layer - raster 5, and drag the copy over the tube layer on the layers pallet.

Set your selection tool to Selection type: Rectangle, Mode: Replace and select the top half of Copy of Raster5, then press the delete key.

Selections --> select none.

Using your eraser tool, erase the bit of the tube that hangs out below the frame on the bottom. Add a drop shadow of choice to tube. I am using offsets vertical of 8, horizontal of -8, opacity of 85, blur of 35, color dark purple (#400040).

On the layers pallet, click on Copy of Raster5 to activate it.

Open GC_BarbedWire_CBJ, resize to 85%, and add to main canvas, centered at H450, V500.

Open GC_Stringwordart_cbj, and add to main canvas, centered at H400, V600.

Open GC_dragonfly_Cbj, mirror, resize to 50%, and add to main canvas, centered at H620, V200.

On the materials pallet, set your foreground color to transparent and your background color to black (#000000). Using font of choice, add the copyright information to your tag.

For the Yvette tube, that information is (c)Elias Chatzoudis www.elias-design.gr Your_MPTLicense#.

I am using Trebuchet MS, which is a windows system font, 4 points, bold, and centered, and then I fit text to path. I then converted it to a raster layer and moved it to where I wanted it located, along the side of a frame. It's easier to move the text once it's converted to a raster layer.

You can now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add desired name to tag. I am using the Goth Chic alpha by Whispy's D'zines, which is a FTU alpha.

I have the located my name at H250, V650, and add a glow to the outside of the name using the drop shadow effect, with the following settings: Offsets V&H of 3, opacity of 85, blur of 15, color #ff40ff. I then redid the shadow with offsets, v&H of -3, with the rest of the setting staying the same.

Merge, visible, and resize your tag to 75% - 600 x 600 pxls. Save as a .jpg file, and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Sunday, April 18, 2010

Dark Angel tutorial (PTU)

Dark Angel


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Dark Angel ptu taggers kit by Grunge & Glitter Scraps. This is a PTU kit, which is available exclusively at Sophisti-Scraps.com.

Tube of choice. I am using psp14357-WhereShadowsWalk by Unholy Vault Designs. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #255 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Moonbeam alpha by Julie It Is. This is a FTU alpha which may be downloaded from Julie's Blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Paper6. Go to layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask# 255. Make sure the "fit to canvas" box is checked, then click on load.

Copy merged, and add to main canvas, centered.

Open Mesh, copy and add to main canvas, centered.

Open Silver Star, copy and add to main canvas, centered at H500, V250. Image --> Free Rotate --> rotate left, 15 degrees.

Duplicate and move copy to H200, V200.

Open Flower4, resize to 75% and add ot main canvas, centered at H400, V550.

Open Flower1 and add to main canvas, centered at H200, V450. Duplicate and relocate duplicate to H600, V550.

Open Candle2, resize to 75%. Add to main canvas, centered at H275, V450.

Open psp14357-SCUVD-WhereShadowsWalk, copy BonusCloseUp, and add to main canvas, centered at H400, V350.

Open ribbon1, and add to main canvas, centered at H400, V575. Using your eraser tool, erase any part of the tube (Raster 6) that falls below the ribbon.

Add drop shadow of choice to tube. I am using offsets, vertical and horizontal of -7 each, opacity of 65, blur of 35, color black (#000000).

Click on the ribbon layer, rater 7, to activate.

Open butterfly2, and resize to 75%. Copy and add to main canvas, centered at H550, V550.

On the materials pallet, set your foreground color to transparent, and your background color to very dark gray (#404040). Using font of choice, add copy right information to your tag.

I am using Trebuchet MS, 4 points, bold and centered. For the Where Shadows Walk tube the copyright info is: (c)Unholy Vault Designs http://asaenath.deviantart.com Your MPTLIcense#.

I have my copyright information centered at H400, V700.

You may now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Moonbeam alpha by Julie, It is, which is a FTU full size alpha I have resized for tagging purposes.

I have centered my name at H300, V575. Actual location will depend upon the size and the length of the name you are using.

Delete the white background layer, and merge visible. Resize your tag by 75% to 600 x 600 pxls, and save as a .png file, and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Moonlight Encounter tutorial (PTU)

Moonlight Encounter


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Wings of Spring taggers kit by Crazed's Creations. This is a PTU kit, which available at Scrappetizing.com as well as other fine online stores.

Tube of choice. I am using psp7671-UnderTheFullMoon by Deborah Grieves. You must have a license to use this tube, which is available at MYPSPTubes.com.

Wee Scots Lass mask #275 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Moonbeam alpha by Julie It Is. This is a FTU alpha which may be downloaded from Julie's Blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Crazeds_paper16_WOST. Go to layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask #275. Make sure the Fit to Canvas box it checked, then click on load.

Copy merged and add to main canvas, centered.

Open Crazeds_gazebo_WOST and add to main canvas, centered at H400, V300.

Open Crazeds_grass_WOST, resize to 75% and add to main canvas, centered at H480, V350. Duplicate and relocate the copy to H580, V350.

Open Crazeds_greenery1_WOST and add to main canvas, centered at H250, V470.

Open psp7671-SCGrieves-UnderTheFullMoon, and copy the Tube layer. Add to main canvas, centered at H360, V410.

Add drop shadow of choice to tube. I am using offsets, vertical of 7, horizontal of -7, opacity of 65, blur of 25, color dark gold (#af770d).

Open Crazeds_leaves1_WOST and add to main canvas, centered at H400, V600.

Open Crazeds_mushroom5_WOST, resize to 75% and add to main canvas, centered at H650, V500.

Open Crazed_leaf3_WOST and add to main canvas, centered at H250, V650.

On the materials Pallet, set your foreground color to transparent and your background color to black (#000000). Using font of choice add copyright information to the tag.

For the UndertheFullMoon tube that information is: (c)Deborah Grieves www.cynnaliafantasyart.com Your_MPTLicense#.

I am using Trebuchet MS, 4 points, bold and centered.

You may now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Moonbeam Alpha by Julie It Is. This is a FTU full size alpha I have resized for tagging purposes. I have located my name at H250, V100. Actual location will depend upon the length and size of name you are using.

Delete the white background layer, and merge visible. Resize your tag to 75% (600 x 600 pxls) and save as a .png file and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Saturday, April 17, 2010

Community Service tutorial (PTU)

Destiny


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Destiny taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp12793-Piper by Alex Franco. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #83 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Goth Chic alpha by Whispy's D'zines, which is a FTU alpha that may be downloaded from her blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Paper2-GI_Destiny. Go to layers --> load/save mask --> load mask from disk and locate Wee Scots Lass mask #83. Make sure the fit to canvas box is checked, then click on load.

Copy merged and add to main canvas, centered.

Open Moon-GI_Destiny, resize to 35%, then add to main canvas, centered at H550, V200.

Open Castle1-GI-Destiny, resize to 65%, and add to main canvas, centered at H550, V400.

Open Tree-GI_Destiny, resize to 75% then add to canvas, centered at H250, V375.

Open Grass-GI_Destiny, and add to main canvas, centered at H400, V650

Open Fog2-GI_Destiny, and add to main canvas, centered.

Open Fog1-GI_Destiny, and add to main canvas, centered.

Open Fence-GI_Destiny, and add to main canvas, centered.

Open psp12793-SCFranco-Piper, copy the Tube 2 layer and add to main canvas, centered at H400, V500.

Add drop shadow of choice to tube. I am using offsets Vertical of 7, Horizontal of -7, opacity of 85, blur of 35, color black (#000000).

Open Chest-GI_Destiny, resize to 35% and add to main canvas, centered at H600, V650.

Open DustTrail-GI_Destiny, and add to main canvas, centered.

On the materials pallet, set your foreground color to transparent and your background color to dark purple (#400040). Using font of choice, add copyright information to the tag.

For the Piper tube, that information is: (c)Alex Franco www.alexfrancoart.11omb.com Your_MPTLicense#.

I am using Trebuchet MS, 4 points, bold and centered.

You can now save the artist's copy of your tag as a .pspimage file.

Using font of alpha of choice, add name of choice to tag. I am using the Goth Chic alpha by Whispy's D'zines. I have the name centered at H300, V150. Actual location will depend upon length and size of name.

Delete the white background layer and merge visible. Resize to 75% (600 x 600 pxls) and save as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

The Hunger tutorial (PTU)

The Hunger


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Life's Blood taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp12314-Hunger by Unholy Vault Designs. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #281 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Bloody alpha by Sarah Bryan, which is a FTU alpha that may be downloaded from Pimp by tags with Scraps.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Paper4-GI_LifesBlood. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask#281. Make sure the fit to canvas box is checked, then click on load.

Copy merged and add to main canvas, centered.

Open Netting-GI_Life'sBlood and add to main canvas, centered.

Open WireDeco-GI_Life'sBlood and add to main canvas, centered at H400, V200.

Open Ivy-GI_Life'sBlood and mirror. Add to main canvas, centered at H225, V400.

Open HeartCrossCharm-GI_Life'sBlood. Resize to 75% and add to main canvas, centered at H525, V275.

Open Bow-GI_Life'sBlood. Resize to 50% and add to main canvas, to align with the top of the HeartCrossCharm (centered at H520, V225). Add a drop shadow of choice to bow. I am using offsets, vertical and horizontal of 2 each, opacticy of 65, blur of 10, color black (#000000),

Open psp12314-SCUVD-Hunger, copy the tube layer and add to main canvas, centered at H300, V350. Add a drop shadow of choice to tube. I am using offsets vertical and horizontal of 8 each, opacity of 85, blur of 35, color black (#000000). Keep the shadow on the same layer as the tube.

Duplicate the tube layer, and resize the copy by 75%. Relocate the copy to H450, V450.

Duplicate the tube copy, and resize the new copy by 75%. Relocate to H600, V550.

Open Blood-GI_Life'sBlood and add to main canvas, centered at H300, V600.

Open Rose-GI_Life'sBlood, and resize to 25%. Add to main canvas, centered at H250, V660.

On the materials pallet, set your foreground color to transparent and your background color to Orange-Gold (#f2a91c). Using font of choice, add copyright information to tag.

For the Hunger tube, that information is: (c) Unholy Vault Designs http://asaenath.deviantart.com Your_MPT_License#.

I am using Trebuchet MS, 4 points, centered and bold and have fit my text to path.

You may now save the artist's copy of your tag as a .pspimage file.

Click on the Ivy layer to activate. Using font or alpha of choice, add name of choice to tag. I have the name centered at H300, V100. Actual location may very depending upon length and size of name. I am using the Bloody Alpha by Sarah Bryan, which is a FTU alpha.

Delete the white background layer, and merge visible. Resize tag by 75%, to 600 x 600 pxls, and then save as a .png file and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Thursday, April 15, 2010

Vindictive Voodoo

VindictiveVoodoo


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Vindictive Pleasures taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp12307-VoodooDoll by Unholy Vault Designs. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #116 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Goth Chic alpha by Whispy's D'zines, which is a FTU alpha that may be downloaded from her blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Paper20-GI_VindictivePleasures. Go to layers --> load/save mask --> load mask from disk and local Wee Scots Lass mask #116. Make sure the fit to canvas box is checked, then click on load.

Copy merged and add to canvas, centered.

Open Puzzle-GI_VindictivePleasures. Copy and add to main canvas, centered.

Open Beads-GI_VindictivePleasures. Copy and add to main canvas, centered.

Open Plants-GI_VindictivePleasures, resize to 75% and add to main canvas, centered at H725, V400.

Open Frame3-GI_VincictivePleasures, resize to 75% copy and add to main canvas, centered.

Open psp12307-SCUVD-VoodooDoll, copy tube layer and add to main canvas, centered.

Add a drop shadow of choice to tube. I am using offsets, vertical and horizontal of 7 each, opacity of 65, blur of 25, color dark purple (#400040).

Open Candle-GI_VindictivePleasures, resize to 35% and add to main canvas, centered at H530, V570.

Open Ribbon1-GI_VindictivePleasures, copy and add to main canvas, centered at H400, V625.

Open Flower2-GI_VindictivePleasures. Resize to 50%, copy and add to main cavnas, centered at H300, V625.

On the materials pallet, set your foreground color to transparent and you background color to black (#000000).

Using font of choice, add copyright information to the tag. For the VoodooDoll tube, that information is: (c) Unholy Vault Designs http://asaenath.deviantart.com Your_MPT_License#.

I am using Verdana, 4 points, bold and centered, but then I kind of squished it a bit to fit along the side of the frame.

You can now save the artist's copy of the tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Goth Chic alpha by Whispy's D'zines. The name is centered at around H550, V700. Actual location will depend on length and size of name you are using.

Delete your white background layer and merge down. Resize to 75% (600 x 600 pxls) and save as a .png file and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Wednesday, April 14, 2010

Vindicated Tutorial (PTU/SAC)

Vindicated


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Vindictive Pleasures taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp15475-LovedToDeath by Tyson McAdoo. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #171 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trash Hand which is a FTU font that can be downloaded from Free Digital Scrapbooking.com, and the Bloody alpha by Sarah Bryan, which is a FTU alpha that may be downloaded from Pimp by tags with Scraps.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800, Flood filled white.

Open Parchment-GI_VindictivePleasures. Copy and add to main canvas, centered. Images --> Free Rotate --> rotate right, 15 degrees.

Relocate to H300, V400. Duplicate and mirror.

Open Paper16-GI_VindictivePleasures. Go to Layers --> Load/Save Mask --> Load mask from disk and locate Wee Scots Lass mask #171. Make sure the fit to canvas box is checked, then click on load.

Copy merged and add to main canvas, centered.

Open Flowers-GI_VindictivePleasures and add to main canvas, centered at H250, V350.

Open Beads-GI_VindictivePleasures and add to main canvas, centered at H550, V400.

Open psp15475-SCMcAdoo-LovedToDeath and copy the bonus close up. Add to canvas centered at H400, V350.

Add drop shadow of choice to tube. I am using offsets, vertical and horizontal of 7 each, opacity of 65, blur of 25, color dark purple (#400040).

Open Chain-GI_VindictivePleasures and resize to 75%. Copy and add to main canvas, centered at H400, V600. This will put it right at the bottom of the tube layer.

Open Tape-GI-vindictivePleasures and add to main canvas, centered at H225, V650. Image --> Free Rotate --> Rotate left, 15 degrees.

On the materials pallet, set your foreground color to transparent and your background color to dark purple (#400040). Using font of choice add copyright info to the tag.

For the Loved to Death tube that information is: (c)Tyson McAdoo www.tysonmcadoo.com Your_MPTLicense_#.

I am using Trash Hand, 6 points, bold and centered and then free rotated the text left, 15 degrees to match the tape.

You can now save the artist's copy of the tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Bloody alpha by Sarah Bryan, and have located the name at H550, V650. Actual location will depend upon the size and length of the name you are using.

Delete the White background layer, merge visible and resize to 75% (600 x 600 pxls). Save as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Tuesday, April 13, 2010

Voodoo Chile Tutorial (PTU)

Voodoo Chile


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Blood Moon Volturi taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp15527-VoodooGirl by Unholy Vault Designs. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #129 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Goth Chic alpha by Whispy's D'zines, which is a FTU alpha that may be downloaded from her blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800 pxls, flood filled white.

Open Paper23-GI_BMVolturi. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask # 129. Make sure the fit to canvas box is checked then click on load.

Copy Merged and add to main canvas, centered.

Open Mesh3-GI_BMVolturi and add to main canvas, centered. Image --> Free Rotate --> Rotate Right --> 10 degrees.

Open Splatter2-GI_BMVolturi and add to main canvas, centered at H550, V325.

Open Thorns-GI_BMVolturi and add to main canvas, centered at H400, V300.

Open psp15527-SCUVD-VoodooGirl, copy Raster 1 and add to main canvas, centered.

Add a drop shadow of choice to tube. I am using offsets vertical 7, horizontal -7, opacity 85, blur35, color very dark red (#400000).

Open GlitterSpill-GI_BMVolturi and resize to 50%. Add to main canvas, centered at H350, V550.

Open Leaves-GI_BMVolturi and add to main canvas, centered at H400, V600.

Open Pin-GI_BMVolturi and resize to 35%. Using your eraser tool, erase a small portion of the pin near the center so that it appear stuck through the canvas.

Copy and add to canvas, centered at H600, V450. Image --> free rotate --> rotate right 15 degrees.

Place a second copy of the Pin at H200, V250. Image --> free rotate --> rotate left 20 degrees.

Open Splatter-GI_BMVolturi, flip, copy and add to main canvas, centered at H400, V650.

On the materials pallet set your foreground color to black (#000000) and your background color to blood red (#7a0000). Using font of choice, add copyright info to the tag.

For the VoodooGirl tube that information is: (c) Unholy Vault Designs http://asaenath.deviantart.com Your_MPT_License#

I am using the font Verdana, 4 points, bold and centered at around H400, V700.

You can now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Goth Chic alpha by Whispy's D'zines. The name is centered at around H550, V100. Actual location will depend on length and size of name you are using.

Delete your white background layer and merge down. Resize to 75% (600 x 600 pxls) and save as a .png file and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Wednesday, April 7, 2010

Crazy Attitude tutorial (PTU)

Crazy Attitude


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The All About Attitude taggers kit by Crazed's Creations. This is a PTU kit, which available at Just4Taggers.com as well as other fine online stores.

Tube of choice. I am using psp15216-Clubbing by Elias Chatzoudis. You must have a license to use this tube, which is available at MYPSPTubes.com.

Wee Scots Lass mask #225 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Goth Chic alpha by Sarah Bryan. This is a FTU alpha which may be downloaded from Sarah's Blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800 pxls, flood fill white.

Crazeds_paper11_AAMAT. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask #243. Make sure the "Fit to Canvas" button is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open Crazeds_blingcurtain1_AAMAT and add to canvas, centered at top.

Using your magic wand tool, click anywhere outside the paper area on Raster 1 to select, then activate Raster 2, the bling curtain layer and press delete.

Selections --> Select None.

Open Crazeds_forgetmenot3_AAMAT and add to main canvas, centered at H250, V300. ON the layers pallet, drag it under the bling curtain layer.

Open Crazeds_envelope1_AAMAT and add to main canvas, centered at H300, V500. Images --> Free rotate --> Rotate right 20 degrees.

Open psp15216-SCChatzoudis-Clubbing, copy Raster 1 and add to main canvas, centered.

Open Crazeds_stars4_AAMAT and mirror. Add to main canvas centered at H500, V450.

Image --> free rotate --> rotate right 45 degrees.

Using your eraser tool, erase the part of the tube that falls between the second and outside lines of the star.

Add a drop shadow of choice to tube. I am using offsets vertical of -7, horizontal of 7, opacity 65, blur of 25, color very dark blue (#000040).

Open Crazed_word1_AAMAT and add to main canvas, centered at H500, V600.

On the materials pallet, set your foreground color to transparent and your background color to raspberry (#c51b63). Using font of choice add copyright information to the tag.

For the Clubbing tube, that information is (c) Elias Chatzoudis www.elias-design.gr Your MPTLicense#.

I am using Verdana, 6 points, bold and centered and fit text to patch to mirror the arch of the stars on the bottom of the tag.

You can now save the artist's copy of you tag as a .pspimage file.

Using font of alpha of choice add name of choice to tag. I am using the Goth Chic alpha by Sarah Bryan, which is a FTU alpha.

I centered the name at H150, V650 and then used free rotate to rotate it right, 20 degrees. Actual location may very depending upon the size and length of your name.

Delete your white background layer and Merge visible. Resize tag by 75% to 600 x 600 pxls and save as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

My Demon Lover tutorial (PTU)

My Demon Lover


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Erszebet Bathory taggers kit by Gothic Witch Creations. This is a PTU kit, which can be purchased at Aussie Scrap Designs.

Tube of choice. I am using psp14621-GothicRomance by Unholy Vault Designs. You must have a license to use this tube, which can be purchased at MyPSPTubes.com.

Wee Scots Lass mask #222 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Gothic Chic alpha, which is a FTU alpha by Whispy's D'zines. This is a full sized alpha I have resized for tagging purposes.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 600 x 600 pxl, flood filled white.

Open GWC_EB_paper15. Go to Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask #222. Make sure the "Fit to Canvas" box is checked, then click on load.

Edit --> Copy Merged and add to main canvas, centered.

Open GWC_EB_petals1 and add to main canvas, centered.

Open GWC_EB_GI_CGSign3 and add to main canvas centered at H450, V300. Image --> Free rotate --> rotate right 10 degrees.

Open GWC_EB_frame38, copy and add to main canvas, centered.

Open psp14621-SCUVD-GothicRomance, copy the close up layer and add to main canvas, centered. Resize by 80% (Make the resize all layers box is unchecked as you only want to resize the tube.)

Duplicate the frame layer (Raster 4) and drag the copy over the tube layer.

Using your magic wand, click anywhere outside the copy of frame to select. The on the layers pallet, activate your tube layer (Raster 5) and press delete.

Selections --> Select none.

Set your selection tool to Selection Type: Rectangle, Mode: Replace and select the part of the frame copy (Copy of Raster 4) - no lower than 275 on the vertical guide bar - then press delete.

use your eraser tool to fix the shoulder area on the tube to fit to frame. Should just be a wee bit needs to be erased.

Add a drop shadow of choice to tube. I am using offsets vertical -7, horizontal 7, opacity of 85, blur of 35, color very dark red (#400000).

Open GWC_EB_bloodsplat2, copy and add to main canvas, centered at H250, V400.

Open GCW_EB_charm16, copy and add to main canvas, centered at H300, V475.

Open GCW_EB_feather2, resize to 75%, copy and add to main canvas centered at H475, V425. Image --> Free rotate --> rotate left, 10 degrees.

Open GCW_EB_stickpin3, copy and add to main canvas, centered at H110, V500.

On the materials pallet, set your foreground color to transparent and your background color to white (#ffffff). Using font of choice, add copyright info to the tag. For the Gothic Romance tube that information is:

(c)Unholy Vault Designs http://asaenath.deviantart.com Your MPTLIcense@

I am using Verdana, 4 points, centered and bold, and have it text to path to match my frame.

Using font of alpha of choice, add name of choice to tag. I am using the Goth Chic alpha by Whispy's D'zines, and have the name centered at h400, V450. Actual location will depend on the size and length of the name you are using.

Delete your white background layer, merge visible, and save a .png file and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

The Warrior Fallen tutorial (FTU)

The Warrior Fallen


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Beloved Memories taggers kit by Gothic Inspirations. This is a FTU kit, which is available on Jessica's Blog.

Tube of choice. I am using psp12491-Warrior by Joseph Corsentino. This is a FTU tube, but you must have a license to use it which may be obtained from My PSP Tubes.com.

Wee Scots Lass mask #186 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Beloved Memory alpha by Steph's Graphx. This is a free to use alpha that may be downloaded from Steph's Graphx.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800, flood fill white.

Open Paper 8-GI_BelovedMemory. Go Go to Layers --> Load/Save Mask --> Load Mask from Disk and locate Correll_07_007. Make sure the "Fit to canvas" box is checked, then click on load.

Edit --> Copy Merged, and add to main canvas, centered. Note that because Jessica's papers are larger then our canvas area, some of the masked paper will run off the edges. This is fine, and desirable for what we are trying to do.

Open Paper4-GI_BelovedMemory. Go to Layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass Mask #186. Make sure the "Fit to canvas" box is checked, then click on load.

Edit --> Copy Merged, and add to main canvas, centered.

Open PhotoFrame-GI_BelovedMemory and add to main canvas, centered. Image --> Free Rotate --> Rotate left, 20 degrees.

Open Tears-GI_BelovedMemory and add main canvas, centered at V200, H350.

Resize to 75% and add a second copy to main canvas, centered at H100, V300.

Resize your canvas to 75% (600 x 600 pxls).

Open Newspaper2-GI_BelovedMemory. Resize to 75% and add to main canvas centered at H300, V425. Image -->Free Rotate -- Rotate left, 15 degrees.

Open Ribbon-GI_BelovedMemory, resize to 75% and add to main canvas, centered at H300, V450.

Open Candle-GI_BelovedMemory, resize to 35% and add to main canvas, centered at H450, V400.

Open HeartCharm-GI_BelovedMemory, resize to 25% and add to main canvas, centered at H475, V475. Image -->Free Rotate --> rotate right, 10 degrees.

Open psp12491-SCCorentino-Warrior, copy the tube layer and add to your main canvas, centered.

Add drop shadow of choice to tube. I am using offset vertical of -8, horizontal of 5, opacity of 85, and blur of 35, color black (#000000).

On the materials pallet, set your foreground color to tranparent and your background color to black #000000. Using font of choice, add copyright information to tag.

For the Warrior tube, that information is: (c)Joseph Corsentino www.timeofthefaeries.com Your_MPTLicense#

You can now save the artist's copy as a .pspimage file.

Using font or alpha of choice add name of choice to tag. I am using the Beloved Memory alpha by Steph's Graphx and have centered my name around H350, V480. Actual location will depend upon the size and length of name.

Merge down and save as a .jpg file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Tuesday, April 6, 2010

Addicted 2 Rac tutorial

Addicted 2 Rac


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Addicted to Rac taggers kit by Crazed's Creations. This is a PTU kit, which currently available as part of the Addicted to Rac collaboration at Just4Taggers.com. You may buy this collaboration outright for $10, or you may get it free with a $10 purchase.

Tube of choice. I am using Bad Barbie by Ismael Rac. You must have a license to use this tube, which is available at artisticmindsinc.com.

Wee Scots Lass mask #225 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Goth Chic alpha by Sarah Bryan. This is a FTU alpha which may be downloaded from Sarah's Blog.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layers canvas, 800 x 800 pxls, flood filled white.

Open Crazeds_paper11_ATRT. Go to Layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask #225. Make sure the "Fit to canvas" button is checked, then click on load.

Edit --> Copy Merged and add to main Canvas, centered.

Open Crazeds_doodle3_ATRT and add to main canvas, centered at H400, V200.

Open Crazed_Stars1_ATRT and add to main Canvas, centered at H600, V400. Go to Image --> free rotate --> rotate right, 20 degrees. Duplicate the layer, and mirror.

Open crazeds_frame5_ATRT and add to main canvas, centered at H400, V450.

Open Ismael Rac's Bad Barbie03 and select tube with hair color that appeals to you. Copy and add to main canvas, centered at H400, V450.

Dupilicate the frame layer and drag the duplication over the tube. Set your selection tool to Selection type: Rectangle, Mode: Replace, and select the top half of the duplicated frame. Delete.

Selections --> Section none.

Open Crazeds-starchain1_ATRT and resize to 75%. Add to main canvas centered at H180, V500.

Open Crazed-guitarpick3_ATRT, resize to 75% and add to main canvas, centered at H200, V550.

Open Crazeds_guitar2_ATRT and add to main canvas, centered at H250, V500.

Image --> Free rotate, rotate left, 25 degrees.

On the materials pallet, set your foreground color to transparent, and your background color to very dark purple (#400040). Using font of choice, add the copyright information to the tag. 

For the Bad Barbie tube, that information is (c)Ismael Rac www.xeracx.com Your_AMI_LIcense#

You may now save the artist's version of your tag as a .pspimage file.

Using font or alpha of choice add name of choice to tag. I am using the Goth Chic alpha by Sarah Bryan. I have centered my name at around H450, V580. Actual location will depend upon size and length of name.

Delete the white background layer, and merge visible. Resize to 75% (600 x 600 pxls) and save a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Sunday, April 4, 2010

Delusional Tutorial

Delusional


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Delusional taggers kit by Gothic Inspirations. This is a PTU kit which may be purchased at the Gothic Inspirations store.

Tube of choice. I am using psp13801-KittyKat by Keith Garvey. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #221 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Cardboard alpha by Elyane Araujo, which is a PTU alpha.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, floodfilled white.

To begin open a new raster layer canvas, 800 x 800 pxls, flood fill white.

Open Paper20-GI_Delusional. Layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass Mask #221. Make sure the fit to canvas box is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open Parchment-GI_Delusional, and add to main canvas, centered. Image --> Free Rotate --> Rotate Right 27 degrees.

Open Moon-GI_Delusional, resize to 50% and add to main canvas, centered at H250, V200.

Open Gates-GI_Delusional copy and add to canvas, centered.

Open Spiders-GI_Delusional and add to main canvas, centered at H650, V400.

Open psp13801-SCGarvey-KittyKat (or tube of choice) and copy the bonus closeup layer. Add to main canvas, centered.

Add drop shadow of choice. I am using Vertical & Horizontal offsets of 7, Opacity 85, blur 25, color black (#000000).

Open Frame3-GI_Delusional and add to main canvas, centered at around H400, V430, or so bottom of the frame matches the bottom of the tube.

Duplicate and on the layers pallet, drag the duplicate under the tube layer.

Return to the main frame layer (Raster 6). Using your selection tool set to Selection: Rectangle, Mode: Replace, select the top half the frame and then press the delete key.

Selections --> Select None.

Open Stitches-GI_Delusional, and add to main canvas, centerd at H400, V650.

Open CandlesMelting-GI_Delusional, resize to 50% and add to main canvas, centered at H200, V600.

On the Materials Pallet, set both your background and foreground colors to white (#ffffff). Using font of choice, add the copyright information to your tag. For the Garvey tube, that information is:

(c)Keith Garvey http://garvgraphx.com Your MPTLicense#

I am using the font Verdana, 4 points, bold and centered.

You can now save the artist's version of your tag as a .pspimage.

Using alpha or font of choice, add name of choice to tag. I am using the Cardboard alpha by Elyane Araujo, which is PTU alpha.

Once I added the alpha I used the Staple from the kit, resized to 50% to "staple" the alpha to the tag.

Delete your white background, and merge visible. Resize to 75% (600 x 600 pxls) and save as a .png file, and you're all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Saturday, April 3, 2010

Easter Chic tutorial (FTU)

Easter Chic


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Goth Chic taggers kit by Nette's NightOwl Works. This is a FTU kit, which can be downloaded from Nette's blog.

Tube of choice. I am using Mandy3a by Sky Scraps. This is a FTU tube which may be obtained at the Sky Scraps Designs store.

The free to use Goth Chic word art by Conchi which may be downloaded at the DiseƱando Scraps blog.

Wee Scots Lass mask #261 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and Goth alpha that came enclosed with the kit.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas 800 x 800 pxls, flood filled white.

Open nnwgc3. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask #261. Make sure the fit to canvas box is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open Wortartgothicchic by Conchi and get gothchic4. Copy and add to main canvas, centered at H400, V200. Image --> Free rotate --> rotate left, 20 degrees.

Open nnwheart2ts and resize to 65%. Add to main canvas, centered.

Open nnwgcspatterframe3, resize by 85% and add to canvas, centered. Using the pick tool, adjust the heart just a bit so that it lines up with the top of the frame.

Open nnwgothegg1, and resize to 35%. Add to canvas centered at H200, V600. Image --> Free Rotate --> Free Rotate left, 15 degrees.

Open nnwgothegg2, and resize to 30%. Add to canvas centered at H350, V600. Image --> Free Rotate --> Free Rotate right, 15 degrees.

Open nnwgothegg4, and resize to 30%. Add to canvas centered at H500, V600. Image --> Free Rotate --> Free Rotate left, 20 degrees.

Open SkyScraps-Mandy3a, and add to main canvas, centered at H550, V400. Add a drop shadow of choice. I am using offsets, vertical of 8, horizontal of -8, opacity of 85, blur of 25, color bright green (#40ff40).

Open nnwgcbunny and add to main canvas, centered at H300, V650.

On the materials pallet, set your foreground color to transparent, and your background color to bright green (#40ff40). Using font of choice add copyright info to your tag. For the Mandy tube, that info is:

(c)Sky Scraps http://skyscrapsdesigns.com/shop/

I am using Verdana, which is a windows system font, 4 points, bold and left justified.

You can now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the alpha that was included in the kit and have centered the name at H250, V150. Actual location will depend on the length and size of name.

You can now merge visible, resize to 75% (600 x 600 pxls) and save as a .jpg file, and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Wicked Chic tutorial (FTU)

Wicked Chic


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Goth Chic Sampler taggers kit Created by Jill. This is a FTU kit, which can be downloaded from Jill's blog.

Tube of choice. I am using Goth Chic 2 (Close up) by Sky Scraps. This is a FTU tube which may be downloaded from Marie's tubes blog.

Wee Scots Lass mask #281 which you can download HERE.

Font(s) and/or alpha of choice. I am using Verdana which is a windows system font, and the Gothic Chic alpha, which is a FTU alpha by Whispy's D'zines. This is a full sized alpha I have resized for tagging purposes.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800, flood fill white.

Open GCS_paper03_cbj. Layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask #84. Make sure the fit to canvas layer is checked, then click on load.

Go to image --> resize and resize the mask layer only by 125%. (Unclick the box that says "resize all layers".)

Edit --> copy merged and add to main canvas, centered.

Open GCS_glitter_cbj and add to main canvas, centered at H400, V350.

Open GCS_workart_cbj and add to main canvas, centered at H400, V200. Image --> Free Rotate --> rotate left, 25 degrees.

Open GCS_twine_cbj and add to main canvas, centered at H400, V500.

Open SkyScraps_GC1 and resize to 75%. Add to canvas, centered.

Add a drop shadow of choice. I am using offsets, horizontal of 7, vertical of -7, opacity of 85, blur of 25, and color of #008080.

Open GCS_frame2_cbj, rotate left, copy and add to main canvas, centered. Using your pick tool, adjust it slightly to line up with the bottom edge of the tube.

Open GCS-ricrac2_cbj, resize to 55% and add to main canvas, centered at H400, V600.

On the layers pallet, click on the frame layer to activate, then, using your magic wand, click anywhere outside of the frame to select. With the selection still in place, click on the ricrac2 layer and then press your delete key.

Selections --> Select None.

Open GCS_ribbon_cbj and add to canvas, centered at H400, V600.

Open GCS_flower1_cbj and add to canvas, centered at H200, V550.

Open GCS_chick_cbj, resize to 50% and mirror. Copy and add to main canvas, centered at H200, V600. Add a drop shadow of choice to the chick.

On the materials pallet, set your foreground color to transparent and your background color to Goth Chic red (#cd0059).

Using font of choice, add the copyright info to the tag. For the Sky Scraps tube, that information is: (c)Sky Scraps http://skyscrapsdesigns.com/

You can then save the artist's copy of your tag as a .pspimage.

Using font or alpha of choice, add name of choice to tag. I am using the Gothic Chic alpha by Whispy's D'zines.

I have my name centered at H500, V630, and have added a drop shadow glow (color #ff80ff) to it.

Delete the white background layer and merge visible. Resize to 75% (600 x 600 pxl) and save as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Friday, April 2, 2010

Wytchkraft tutorial (PTU)

WytchKraft


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The The Craft ptu taggers kit by Grunge & Glitter Scraps. This is a PTU kit, which is available exclusively at Sophisti-Scraps.com.

Tube of choice. I am using psp12795-Violet by Alex Franco. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #283 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and Scythe, which is a free to use font that may be downloaded from Outlaw by Design.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

To begin, open a new raster layer canvas, 800 x 800, flood filled white.

Open Paper8. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask #283. Make sure the fit to canvas box is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open magic1, copy and add to main canvas, centered.

Open deadtree and add to canvas, centered at H300, V350.

Open frame1, copy and add to main canvas, centered.

Open spider. Image --> Mirror. Copy and add to main canvas, centered at H500, V200. Image --> Free Rotate --> rotate left, 20 degrees.

Open barbed wire, resize to 75% and add to main canvas, centered at H400, V650.

Open psp12795-SCFranco-Violet (or tube of choice) and add to main canvas, centered.

Add a drop shadow of choice to tube. I am using offsets, vertical and horizontal of 8 each, opacity of 85, blur of 25, color black (#000000).

Open spellbook and add to main canvas, centered at H550, V600.

Open pentagram, resize to 75% and add to main canvas, centered at H600, V600. Image --> Free Rotate --> rotate right, 15 degrees.

Open potionbottle1, add to main canvas centered at H500, V600.

On the materials pallet, set your foreground color to transparent and your background color to light gray (#c0c0c0).

Using font of choice, add the copyright information to your tube. For the Alex Franco tube, that information is: (c) Alex Franco www.alexfrancoart.11omb.com Your MPT_License#.

I am using Trebuchet MS, which is a windows system font, 4 points, bold and centered.

You can now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice add name of choice to tag. I am using the font Scythe with a silver gradient, 24 points, Bold, and Centered. I have my name centered at H300, V620, actual location will depend on the length and size of the name you are using.

Delete the white background layer, and merge visible. Resize your tag to 75% (600 x 600) and save as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Batter Up tutorial (PTU)

Batter Up


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Goth Chic taggers kit by Gothic Inspirations. This is a PTU kit, which is available at Gothic Inspirations.

Tube of choice. I am using psp7496-Baseball by Keith Garvey. You must have a license to use this tube, which may be purchased at MyPSPTubes.com.

Wee Scots Lass mask #281 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and the Gothic Chic alpha, which is a FTU alpha by Whispy's D'zines. This is a full sized alpha I have resized for tagging purposes.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, 800 x 800, flood fill white.

Open Paper12_GI_GothChic. Layers --> Load/Save Mask --> Load Mask from Disk and select Wee Scots Lass mask #281. Make sure the fit to canvas box is checked, then click on load.

Copy merged, and add to main canvas, centered.

Open GlitterSpill-GI_GothChic, resize to 75% and add to main canvas, centered.

Oepn Splatter1_GI_GothChic, and add to main canvas, centered at H400, V300.

Open Frame4-GI_GothChic, resize to 75% and add to main canvas, centered.

Open psp7496-SCGarvey-Baseball, copy the tube layer and add to main canvas, centered.

Add a drop shadow of choice to tube. I am using offsets vertical and horizontal of 7 each, opacity of 65, blur of 35 and color of dark purple (#800080).

Open Flowers-GI_GothChic, resize to 35% and add to main canvas, centered at H350, V550.

Open Ribbon2-GI_GothChic and add to main canvas, centered at H400, V600.

Open BottleCap1-GI_GothChic, resize to 50% and add main canvas, centered at H350, V650.

On the Materials pallet, set your foreground color to transparent and your background color to navy blue (#000040).

Using font of choice, add copyright info to the tag. For the Garvey Baseball tube, that information is:

(c)Keith Garvey http://garvgraphx.com Your_MPT_LIcense#

I am using Trebuchet MS, which is a windows system font, 4 points, bold and centered, then I fit the text to path around the outside of the frame.

It is beyond the scope of this tutorial to explain how to do that, I promise I will write a separate tutorial for that soon, as long as my computer doesn't crash again.

You can now save your artist's copy as a .pspimage file.

Using font or alpha of choice, add name of choice to tag. I am using the Goth Chic alpha by Whispy's D'zines. I located my alpha centered at H550, V550, but actual location will depend on the size and length of the name your are using. I then added a drop shadow offsets V & H of 3 each, opacity 65, blur 10, color #ff80ff to make it stand out, as it's a dark alpha.

you can now delete the white background layer, merge visible and resize your tag to 75% (600 x 600 pxls). Save as a .png file and your all done.

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.

Thursday, April 1, 2010

Goth Chic Tutorial (FTU)

Goth Chic


This tutorial was written by Dianna Richards of Digicats (and Dogs)/Di Before Dawn Tutorials. Any resemblance to any other tutorial, published or unpublished, living, dead or undead, is purely coincidental.

Please do not rebroadcast, redistribute or otherwise claim this tutorial or any part there of as your own work.




Items you will need to complete this project:

The Goth Chic Sampler taggers kit by Gothic Inspirations. This is a FTU kit, which is available on Jessica's Blog.

Tube of choice. I am using Goth Chic 7 (Close up) by Sky Scraps. This is a PTU tube which may be purchased at Sky Scraps Designs. Sky has a FTU Goth Chic tube which may be substituted for this one which is available at Marie's Blog.

Wee Scots Lass mask #260 which you can download HERE.

Font(s) and/or alpha of choice. I am using Trebuchet MS which is a windows system font, and Scythe, which is a free to use font that may be downloaded from Outlaw by Design.




Note that H# and V# refer to Horizontal and vertical coordinates on your canvas grid. Make sure you have View, Rulers checked in order to see the ruler grid.

When I say "Add to your canvas" I expect that you will copy and paste it as a new layer, unless otherwise state in the tutorial.

This tutorial assumes you have a working knowledge of PSP. It was written using PSP X1, but should work in PSP 8 and up.

Open a new raster layer canvas, flood filled white.

Open Paper3-GI_GothChicSampler. Layers --> Load/Save Mask --> Load Mask from Disk and locate Wee Scots Lass mask #260. Make sure the fit to canvas box is checked, then click on load.

Copy Merged and add to main canvas, centered.

Open Tule-GI_GothChicSampler and resize to 85%. Add to main canvas, centered.

Open HeartSpill-GI_GothChicSampler, and add to main canvas,centered at H400, V550.

Open WordArtTabs-GI_GothChicSampler and add to main canvas, centered at H400, V120.

Open SkyScraps-GC7 (or tube of choice). Resize to 85% and add to main canvas, centered. Add drop shadow of choice, I am using offsets, vertical of 7, horizontal -7, opacity 65, blur of 35, color black (#000000).

Open Glitter-GI_GothChicSampler, resize to 85% and add to main canvas, centered at H400, V600.

Open Chain-GI_GothChicSampler, resize to 85% and add to main canvas, centered at H400, V700.

Open Splatter-GI_GothChicSampler, resize to 75% and add to main canvas, centered at H350, V600.

Open Flower-GI_GothChicSampler, resize to 35% and add to main canvas, centered at H250, V650.

on the materials pallet, set your foreground color to transparent and your background color to Goth Chic red (#c3246f). using font of choice, enter the copyright information for the tube you are using.

For the Goth Chic tube, that information is (c)Sky Scraps http://www.skyscrapsdesigns.com

I am using Trebuchet MS, which is a windows system font, 4 points, bold and centered.

You can now save the artist's copy of your tag as a .pspimage file.

Using font or alpha of choice, add the name of choice to the tag. I am using the font Scythe, 36 points, bold and center with my material foreground set to transparent and my material background set to a silver gradient. I have centered at the name at H550, V650. Actual location will depend upon the size and length of the name you are using.

You can now delete the background layer, Merge visible, resize to 75% (600 x 600 pxls) and save your tag as a .png file and your all done!

I hope you enjoyed this tutorial. If you should have a problem, please feel free to E-Mail Me and I'll be happy to help you out.